How to make a stepladder chair with your own hands

A transforming chair that can be easily expanded into a staircase will be useful in the country or at home. With a beautiful design, a wooden stepladder chair will look very stylish and will fit into any interior.

When unfolded, a stepladder usually consists of three steps, which will be enough to get to the ceiling of a standard height. Making a folding stepladder chair is easy with your own hands. This will require standard materials, a small number of tools and desire.

Necessary materials

Usually, wood is used to make furniture with your own hands. It is the most environmentally friendly and reliable material. Pine, linden, oak or walnut boards are available in various sizes in most stores.

Pine is a more durable material, since wood contains resinous and ethereal substances. They protect it from rotting and insect attacks. In addition, pine has a pleasant aroma. The material has a low price.

Linden is a soft, pliable tree. It is quite cheap. Has a light shade. It is easy to process. It is for this that many wood craftsmen love him.

Oak is the most durable and reliable tree. It is much more expensive than other types of wood. Differs in strength and durability.

Walnut - has a special silky texture and beautiful shades. It is a rather expensive and luxurious material.

Any wood is highly durable, and this is important for a step-ladder. Wooden furniture looks luxurious and rich.

In addition to natural wood, you can also use plywood. This material is cheaper but less durable.

What tools are needed

In addition to materials, you will also need tools. Some of the tools will be required for the production and assembly of the main elements, and some for the decor and decoration of the chair.

Basic tools:

• Hacksaw.
• Drill with a set of drills.
• Self-tapping screws and screws.
• Glue.
• Plane.
• Piano hinges for ladders.
• Guides for the retractable mechanism.
• Clamps.
• Sandpaper.
• Graph paper.

Additionally, you may need an electric jigsaw, various types of hacksaws. With these tools, you can beautifully decorate the sides of a chair or back.

Drawings and diagrams

Before starting work, it is necessary to prepare a drawing of a stepladder chair. Then use it to make the necessary patterns.

The drawing is made in full size on graph paper. Patterns for parts are made in the following order:

• The main scheme of the part is drawn. Width, height, center line.
• Bends and contour are drawn.
• A pattern is cut out.

For a stepladder chair, you need to make the following parts:

• Front sidewalls - 2 pcs.
• Rear sidewalls - 2 pcs.
• The back of the chair - can be solid from one piece or from 2-3 slats.
• Front half of the seat - 1 pc.
• The back half of the seat - 1 pc.
• Steps - 3 pcs.

Advice.To make the chair look stylish and unusual, you can separately work on the design of the back or sides - make the edges with a bend or decorate with a carved pattern.

For making a step-stool with your own hands, the drawings will be slightly different. The step stool can be of two types. A simple option is a small backless chair with steps. A more complex model is a high transforming stool, in which two additional steps are extended.

The third step is the stool seat. For a stool with retractable steps, you will need the following blanks:

• High legs - 4 pcs.
• Bottom crossbars - 2 pcs.
• Crossbars for the upper part - 2 pcs.
• Upper drawer side - 2 pcs.
• Lower side - 1 pc.
• Seat - 1 pc.

For the retractable part of the stool, you will need to make:

• Medium legs - 4 pieces
• Crossbars - 2 pcs.
• Small feet for the bottom step - 2 pcs.
• Front drawers - 3 pcs.
• Rear drawer side - 1 pc.
• Steps - 2 pcs.

For this model, you will also need slide rails.

Important! After manufacturing, all parts must be carefully processed with sandpaper so that they are smooth. This will avoid getting splinters and will make your work enjoyable.

Decorative overlays made of thin plywood, which can be installed on the sides, will give the stool an original look. These covers can be painted with colored paints.

Stepladder chair manufacturing technology

After all the parts are prepared, you can start assembling the chair or stool. It is better to set aside large parts separately before assembly. It makes sense to lay out small tools on a light surface. It will be so easy to find the item you want.

Chair assembly procedure

1. Connect the steps to the sidewalls. Parts are connected using grooves that are knocked out in advance. Additionally, they are strengthened with glue or self-tapping screws.
2. The backrest must be attached to the rear sidewalls. Seats are connected to both parts.
3. The two halves of the structure are held together by piano hinges.
4. After assembly, the chair can be varnished.

Stool assembly order

1. The legs are fastened with crossbars and drawers with screws and glue.
2. The lower steps are installed.
3. Guides are installed on the inside of the large legs.
4. A retractable mechanism is installed on the outside of the small sidewalls.
5. The mechanism connects.
6. The seat is mounted on top. The necessary plywood decor is fixed on the side.

Advice. At first, it is better to try to assemble the stool without glue, and do not tighten the screws too much. This will help ensure that all parts fit exactly and do not interfere with each other when moving. Then you can apply glue and tighten the screws.

Such home products will become the pride of the owners, interior decoration and comfortable multifunctional furniture.

Video: do-it-yourself stepladder chair