Correct assembly and location of the chest of drawers

After buying furniture and delivering it to the location, it is necessary to turn the parts into a single working mechanism. These instructions for assembling a chest of drawers will help you complete the task quickly and efficiently.

All you need is an assembly diagram, the necessary set of tools and several sequential stages of work. Before connecting the structure, it is important to conveniently arrange everything you need.

Collect all parts and tools on a level surface in the planned installation location.

How to assemble a chest of drawers

Before moving on to an accurate diagram with sequential instructions, it is necessary to consider the general principles.

1. It is better to start assembling any furniture, especially large-sized ones, from the largest parts, continuing to decrease. In our case, first the main body, then the fastening of the drawers and other minor aspects.
2. Only work on a level surface to avoid problems with the ratio of the body parts to each other.
3. Cover the floor with a protective material to protect both furniture and the work surface from scratches.
4. Some materials can be fragile, which is why you need to perform all actions carefully - slowly tighten the bolts, do not drop components, etc.

Necessarily! Perform assembly only in a well-lit place to avoid loss of parts and inaccurate measurements.

Inspection of parts for defects

The path that furniture takes from production to the end user is usually multi-stage, and therefore no one is immune from defects. For the latter, it is better to check the furniture immediately before buying.

Sometimes the body may be scratched or slightly bumped, and sometimes the damage may be significant. Included with the chest of drawers there is an assembly diagram, do not be too lazy to check the package contents before starting work.

Required tools

Some models provide for “seamless” installation of all elements, which greatly simplifies the work. However, for reliability, it is worth using fasteners such as nails and screws.

To do the job well, we need the following set of tools:

1. A tape measure is a mandatory attribute, it is necessary for correct assembly and accurate measurements.
2. We also need a Phillips screwdriver that fits the size of the screws.
3. It is most convenient to assemble the entire structure with a screwdriver. Since the self-tapping screws are of medium size, the drill chuck should not be less than 10 mm.
4. The hammer will also come in handy at work.

If possible, also use a level to assemble the structure perfectly accurately.

Assembly stages

After the initial inspection for defects, as well as the equipment of the workplace with light and tools, it is necessary:

• mentally draw up an action plan guided by the principle “from big to small”;
• we start with the formation of the main body - the frame of the entire structure;
• then you need to collect the boxes;
• the next step will be marking the installation of sliding mechanisms for drawers;
• after which you will need to correctly position all the fasteners;
• now - fronts for drawers and installation of handles;
• the final stage will be the top of the chest.

Important! The sequence of actions and the number of points in the plan may vary from model to model. The furniture is varied, which means that the situation is individual.

Assembling the base of the dresser

Pay attention to how the floor setting is provided. Sometimes casters can be used, which must be fastened with separate self-tapping screws. In other cases, the legs are installed, or the chest of drawers stands on solid plinths.

It is from this element that the process should be started in order to immediately give the mechanism of stability.

Assembling the chest of drawers

In order for the body to be strong and reliable, it is necessary to fix all the walls with the tightening screws. The back of the chest of drawers is usually turned to the wall of the room, and therefore is often made of thin materials, there will be enough nails to fasten it.

If specifically your design provides for transverse strips, they should also be mounted at this stage. To ensure a level surface and maximum alignment of the sides with each other, it is recommended to check the installation result with a level.

Assembly of drawers

The correctness of the assembly of the drawer for the chest of drawers is due to both the accuracy of measurements and the accuracy of the installation of the entire structure. For greater convenience, you should immediately divide all the components into separate piles so as not to get confused.

First, we take short self-tapping screws (25-35mm) and connect the body with them. Then we attach the bottom with screws a little longer (40-50mm). It is advisable to complete the installation of the boxes by fastening the facades using self-tapping screws.

But it is better to carry out this procedure after installing the roller guides along which the box will move. So you will protect yourself from inaccuracies and mistakes.

Installing the guides

The key to the quiet and smooth movement of all elements of the chest of drawers is the correct installation of the guide elements (ball or roller). Accurate measurements with a tape measure are necessary so that the drawers slide out without touching anything or creating additional noise.

Initially, it is necessary to fix the runners on the inside of the chest of drawers itself, then the guides on the outside of the drawers. For successful fixation, you will need small self-tapping screws (no more than 30mm).

If the work done is successful and all the boxes are correctly positioned, all that remains is to attach the facades and handles to them. You can use nails, screws, or even strong double-sided tape.

Where can I put a chest of drawers in the house (good location)

The appearance and dimensions completely determine the place where the chest of drawers will be located more harmoniously and most conveniently. Since pull-out elements take up a lot of space, this type of furniture should definitely not be placed in the aisle, near doors and in narrow rooms.

Ideally, it will be located at the edge of the room next to other interior elements. Also, a chest of drawers can serve as an excellent table for cosmetics, in combination with a mirror, or a good stand for a TV.

Video: assembling a chest of drawers "Four drawers"