How to make a bed with your own hands from chipboard
Visiting furniture showrooms is unlikely to evoke positive emotions. Having seen the prices, the mood will definitely not rise. The cost of a standard bed made from cheap material is simply exorbitant. The best option is to create a bed yourself. In this case, chipboard is perfect.
Pros and cons of making a bed
As mentioned above, sleeping space is very expensive. The more attractive and quality it is, the higher the price rises. Cheap copies will last a short operational period. Over time, they can not only lose their beauty, but simply fall apart.
Making a bed yourself from chipboard will help not only save money. A person will not be limited in the design and shape of the product, the main thing is that it fits the parameters of the selected mattress.
Advantages of a place made from chipboard:
- it is enough to buy accessories and material, while their cost is quite low;
- there is no need for certain tools or special skills, making is quite accessible for any person;
- a drawing of a chipboard bed can be easily found on the Internet;
- such material is not interesting to various insects;
- there are no flaws on its plane;
- resistance to mechanical damage;
- will not begin to flake or dry;
- the ability to get a unique item without overpayments;
- the product will fit perfectly into the interior of the room;
- reliability and high quality.
In addition to the pros, there are several disadvantages:
- low resistance to high humidity;
- with constant installation and dismantling, the product may begin to deform;
- not quite attractive appearance.
The last minus can be easily corrected if a beautiful decor is made and hung on a sleeping place. In principle, the independent process of manufacturing a structure is not particularly complicated. Everyone can handle it if they follow the instructions.
How to make a bed from chipboard with your own hands
The berth is a rather large specimen. At the same time, it is quite possible to make its assembly. Especially if you already have the skills to make sofas or wardrobes. If they are not there, then you should not despair. Drawings taken from the Internet will help in the process.
The most expensive part of the product is the mattress. It is best to buy it ready-made, while not saving on cost. After all, it depends on him how good the dream will be. Considering that the purchased furniture still has to be done independently, what prevents to implement it from your own parts.
Choice of design
Before you start buying material, you need to decide on the appearance and design of the bed. According to qualifications, it is divided into one and a half, single and double. The headboard or back can serve as a support directly. The device is installed on legs or frame. In addition, there are models with special additional drawers for storing bed linen, bunk or with an original shape.
The product can be easily shortened or lengthened based on the height of the person for whom it is made. External parameters are selected relative to the area of the room. Most often, the installation takes place tightly to the wall so that access to the passage remains.
The dimensions of the device depend on the parameters of the mattress:
- the most optimal width for a child is sixty centimeters, for an adult - eighty;
- the length of the mattress should be fifteen centimeters longer than the height of a person;
- the thickness is repelled by the total mass of people sleeping on it.
People whose height is two meters or more must order a mattress. The option of making a bed on your own significantly saves the family budget. The mattress should fit snugly into the structure, while on each side a gap of half a centimeter should be left for comfortable dressing of linen.
Necessary materials
The drawing can really be done with your own hands. A standard schema from the internet would be an excellent foundation. An option already made by someone is also suitable, in which it is enough to put down your measurements.
To make the simplest standard stock, you will need the following materials:
- For the front parts, laminated chipboard sheets are from sixteen to twenty-five millimeters thick - legs, sides, back. The headboard is the tallest detail, it can be curly or in the form of a standard rectangle. The side parts must be completely identical in size. The foot is usually the same height or slightly higher.
- Boards twenty millimeters thick - for crossbars in the amount of three pieces, intended for a mattress with a frame.
- Plywood sheet - for the bottom on which the mattress is placed.
- A beam with parameters thirty by thirty - making a frame of the frame, to which the bottom is fixed, transverse (three pieces) and longitudinal (two pieces) parts.
I recommend assembling using euro screws with plugs, the color of which is identical to the chipboard. This option is as reliable and durable as possible.
Required tools
If the product rests on the body and does not have legs, then it is advised to mount plastic legs closer to the back, the height of which can be adjusted. With the help of their berth, you can put it in the correct horizontal position, especially if there is an uneven floor. In addition, they will provide excellent protection against mechanical damage (for example, from scratches).
Of the tools you will need:
- jigsaw;
- drill with various drills;
- hacksaw;
- other based on the characteristics of the device.
Double foot pads are useful for furniture in the amount of three pieces for each support that is in contact with the floor.
Manufacturing process
The first step is to process the edge of the material and cut it. It is better to entrust these processes to professionals and order them in production. If a person decides to completely do everything on his own, then he will need an iron and melamine edging.
The iron should be turned on about three-fourths of its power, the edge should be applied to the open cut, ironed. If the edges protrude beyond the slab, then the excess is cut off with a construction knife. Further, the details are marked out, laid out, holes are drilled under the euro screws, thrust bearings or legs are fixed.
Assembling a standard bed with a bottom consists of the following steps:
- Assemble the frame from a bar, with three transverse ones, two longitudinal ones are fastened.
- Sheathe the resulting device on top with fiberboard.
- Attach the sidewalls made of chipboard to the longitudinal beams.
- Fasten the headboard and backrests to the sidewalls (fixing should be done in two places, an indent of about three centimeters from the bottom and top edges).
If the bed does not have a bottom, but a frame mattress is available, then the assembly sequence changes slightly:
- Between the sides, fasten two transverse sides as close as possible to the edges and one in the center. They should be located on a wide surface, perpendicular to the floor. The fixation takes place in two places.
- Attach the footboard and headboard to the sides.
This design is perfect for an ordinary mattress, if you put a lattice mattress topper on the supports. It can be easily found in the store if the stock has standard parameters.
The height to which the mattress rises from the floor can be adjusted as desired. The depth should be sufficient so that it is fixed in it as tightly as possible. Also, the mattress should be slightly above the sides of the bed.
Bed decor
As a decoration for the product, you can use MDF overlays in contrasting shades, the thickness of each is about ten millimeters. They should be fixed on the headboard itself, as well as on the footboard. The size of the jewelry is sixteen centimeters less than the parameters of the foot. The distance between the elements is eight centimeters from each side. Fixation takes place with screws, their length is only a couple of millimeters less than the total thickness of MDF and chipboard.
The overlays can also be made of plywood, while covering them with thin foam or fabric. They must be fastened immediately before assembling the structure.
Where can I put
Improper sleeping position can not only lead to poor sleep, but also worsen well-being, cause bad mood and migraines. It is worth listening to some advice in order to perform the correct installation of the product.
When the door is located opposite the window, a draft begins to walk in the room. This option is categorically unacceptable. Do not put the bed with your back to the window, in front of the mirror or in the corner. The best option is diagonally to the door. It should be close to the wall, headboard to the east or north.
Despite the rules of Feng Shui, the device is best placed in a niche, if there is one. Thanks to this, a person will receive a sense of protection, security, comfort and coziness. Being near the window will bring some inconveniences: bright sun rays, noise from the street, etc.Negativity can be mitigated with thick curtains.
Bad spots include a passageway or placement near a door. In this case, you will not be able to rest, because the everyday vanity will constantly interfere. The optimal temperature is not maintained near the battery, and there is a risk of catching a cold near the window due to drafts. If the wall borders on a kitchen or a bathroom, this option will also not lead to a comfortable stay.
From all of the above, the following can be summed up:
- the best installation is with the headboard to the wall;
- the corner of the room is an ideal location for a single bed option;
- diagonally from the front door is a pretty good option.
If there is a double bed, then there must be a free passage to each of its sides. It is desirable that the sleeping place is dark, quiet and calm.
Features of creating a baby bed
The children's room should be comfortable and cozy. Otherwise, the child will not be able to stay in it for a long time. The bed is recommended to be made of non-toxic plastic or natural wood. For convenience, it is produced free and semi-soft.
Also, this option should have elastic lamellas. If the bottom is made of plywood, then the structure will not allow air to pass through well, water will begin to accumulate, and unpleasant odors will appear. The arrangement of the apartment begins with a bed, you can add other interior items to it: a table, a chair, bedside tables and more.
In order to make a children's bed with your own hands, you can use a drawing from chipboard taken on the Internet. To make it, you need to take several slats and a board, the width of which depends on the size of the mattress. Make sure the screws are level and screw on from the outside. Draw a cutout on the side. Drill the hole so that it is slightly angled. This ensures a smooth transition. Connect all sides. Fill the frame, make fastenings with a stapler. Cover upholstery with fabric.
Self-production of a berth will not cause any particular difficulties, but it will significantly save financial resources. Thus, it is possible to obtain an ideal design with the required parameters.
Video: how to make a bed with your own hands from chipboard