DIY headboard making methods

The headboard for the bed is not only practical, but also very aesthetically pleasing. With it, you can transform the boring and monotonous interior of the room, while making the sleeping place more comfortable. In addition, the headboard makes the room visually larger and more spacious, which will be an excellent option if the bedroom space is small.

There are many different options for upholstery and decor for this piece of furniture, so below we will consider the most popular ways to make a headboard with your own hands, no worse than in the photo on the Internet. In fact, this is quite simple, but first things first.

Required materials and tools

So, there are many different ways to make a headboard, but identical materials and tools are always used when creating.

What is required for the headboard:

• Plywood sheets of the required size, you can use MDF.
• Screws, wire cutters, furniture stapler, hammer and nails.
• Additional bars for the frame.
• Upholstery fabric, filler itself, buttons, accessories at will.

Depending on what kind of idea a person will embody into reality, the set of necessary things may vary slightly.

When creating a decoration, it is important to first draw up a drawing and calculate everything exactly, with a small margin. This will require measuring instruments in the form of a ruler and tape measure, a pencil drawing on fabric and paper for applying measurements.

Option for making from pillows

This method, despite the fact that it is done quickly and easily, will always look spectacular. There are two easy-to-follow options that can be done in just a couple of hours of free time.

So, how to make a soft headboard for your bed with your own hands?

• Headboard made of many pillows
  From a large number of pillows of the same size, a large headboard is fastened using a stapler or an ordinary needle and thread. Thus, you can make unusual design decisions, for example, combine multi-colored pillows or with a certain pattern, in the same color scheme, etc.
• Hanging soft headboard made of pillows
  To implement such an idea, you will need one metal or plastic fastener in the form of a pipe, two large pillows and pillow cases with loops for the diameter of the pipe. Using a screwdriver, fasteners are installed, the pillows are put on pillowcases and hung on it. It turns out that the headboard is a suspended structure. It is done in just a few minutes, but at the same time it looks fresh and unusual.

You can make pillows yourself, this will require any filler, however, the best option would be foam rubber, because it holds its shape and retains its original appearance for a long time, regardless of external influences.

Absolutely any shapes can be obtained, for example, "honeycombs", which are created quite simply, cut out according to the shape, but at the same time they look spectacular. It is enough to sheathe the shape of the honeycomb with a colored cloth, and then fix all the pillows on a large sheet of plywood with glue.

Ultimately, the sheet with pillows is attached to the wall as a headboard.

A method of making a soft headboard using the Coach screed technique

The carriage coupler technique looks expensive and attractive, but in fact, such a headboard is created from just a few materials that are practically at hand.

The method, as it is also called, Kapitone is produced in just a few steps.

• To begin with, an approximate drawing is outlined, plywood or MDF sheet, cut to shape.
• A sketch is drawn on a sheet of foam rubber, according to which it will be clear in which places you need to make indentations. Further, the circles are cut clearly according to the drawing, and exactly the same holes are made on the plywood.
• A filler is glued to the base sheet with glue, after which you need to wait until the part is completely dry.
• After gluing, you need to cover the foam rubber with a thin sheet of padding polyester and proceed to the final layer of fabric.
• When covering the frame with fabric, it is necessary to start from the edge, gradually moving towards the middle. At the same time, a needle and thread is threaded into each hole twice, fixing it on the back of a sheet of plywood or MDF with a stapler.
• After the entire surface is decorated in this way, the remnants of the fabric at the edges are wrapped on the rough part and tightly fixed with a regular stapler.

In fact, making a carriage coupler is much easier than it seems at first glance, but it will take a lot of free time. Due to the fastening with the help of threads, the parts of the upholstery are stretched, forming a certain pattern - a rhombus or a square, depending on which sequence the master has chosen.

You can leave it that way, or you can add some "zest" and sew buttons, decorative fabric roses, beads on the places of the recesses. Capitonné will look especially impressive with velvety fabric, leather or its substitute.

Figured headboard

Such a piece of furniture looks unusual, adding some distinctive feature. At the same time, the decor remains minimalistic and does not overload the interior, which will definitely play into your hands in small rooms with little free space.

• For manufacturing, you need to take 4 identical foam plates, draw up a drawing and transfer it to each piece of foam in turn.
• Bends are also indicated on the drawing, a shape is cut out from them. For a start, you can try simple shapes, but it is important to remember that on both sides, along the edges, they should be completely the same.
• After cutting, you need to glue all 4 foam plates together, and after drying, cover with a cloth.

Note! When working with foam, it is better to abandon the stapler and replace it with glue. The fact is that the material simply cannot withstand the impact of the tool, and thanks to the glue, the entire junction will be saturated with it, providing reliable fasteners.

Bed with a high headboard

A high headboard will add coziness while remaining practical. There are many options for creation, which boil down mainly to increasing the height of the parts. However, there are more daring solutions that are easy and simple to do.

You can make a high back from ordinary dense fabric and a special frame. To do this, you should take a long material, having previously measured the length from the ceiling itself to the bottom of the bed. After that, you will need to purchase fasteners in the form of a pipe of their plastic or stainless metal.A prepared canvas is hung on it, like a curtain, and the very bottom of the fabric is tucked behind the bed, thereby creating the appearance of a headboard.

Another idea is to transform old dilapidated doors. If they are left from repairs, you should not rush to get rid of them, because the doors can be turned into a decent headboard.

It is enough to cover them with a layer of paint, decorate them in any way you like and use screws to fix the former doors on the wall. The height of the headrest will depend on the length of the doors.

Chester style headboard

For a long time, Chester's appliances have been highly popular among customers, so stores are full of a variety of selection of pieces of furniture with such decor. This method resembles a carriage coupler, but is a more classic and rigorous version. The drawing is made in the form of rhombuses, and the grooves are neatly covered with small buttons.

To make a headboard at home, as in the case of a carriage coupler, you will need a sheet of plywood, foam rubber, and upholstery fabric. The holes this time need to be made strictly in the shape of a rhombus, outlining even and precise lines, and when pulling the fabric at the place of the tie, sew a button. Chester's style will be ideally combined with dark and restrained tones, and also look advantageous with leather upholstery material.

Sometimes, instead of buttons, rivets or any other round objects are used, for example, beads, large rhinestones. However, in this case, it is no longer possible to call the headboard a classic Chester.

Other non-standard methods

Why limit yourself to standard and familiar ways, if you can translate the most daring and unusual options into reality? There are several ideas that readers will love:

1. Headboard in the form of a fence. It is made from ordinary processed wooden boards, which are trimmed from above in the form of a triangle. The wood can be painted, varnished or left with a natural relief.
2. Laminate or parquet wall. This decision began to gain popularity a lot thanks to daring designers. In this version, everything is simple - a covering is laid on the wall, which serves as a headboard for the bed.
3. Porcelain stoneware slabs. This material is practical and durable. The tiles are laid on the wall, thus creating an unusual pattern or bright color scheme.
4. Frame as a headboard. A frame of the required size is installed on the wall, the inside of it is covered with paint, plates or ordinary fabric.
5. Headboard made of paint. Such material costs mere pennies and is applied very quickly, but it looks outside the box. Of course, this will not give much practicality, but it will save free space.
6. Dyed bamboo. It is enough to install the material on the wall, having previously painted it.
7. Carpet. Of course, at first glance it seems that such an idea has long been outdated, but one should not rush to draw conclusions. If you replace the old "grandmother's" carpet with a more modern variation, you can get an unpretentious decoration of the space above the bed, and also additionally insulate and soundproof the wall.
8. Tulle and paint. This method suggests applying an ornament on the wall, which will serve as a bright accent and a kind of headboard. You do not need to run and print stencils, you can take an old tulle with interesting patterns, cut out the required size and attach, tightly fastening the curtain to the wall, and then cover everything with paint. After drying, a beautiful pattern will remain.
9. Headboard from the stairs. Such a piece of furniture can be used not only for its intended purpose. If you walk with sandpaper, paint the material, or, conversely, varnish it, retaining its original color, you can hang the ladder on the wall sideways, thereby adding zest.It will look not only stylish, but also non-standard. In addition, garlands, glowing elements or other decorations can be hung on this staircase.

The headboard for the bed can be completely different and perform different functions from each other.

In fact, it is not necessary to spend the entire budget on buying furniture if you can make it yourself from improvised means. The article provided options that every person, even those who do not possess the skill in this area, can do. You can make a headrest for a bed with your own hands in just a couple of hours. Remember, the only thing that can hold you back is your own fantasy.

Video: soft headboard for the bed

Bed headboard options in the photo