Wall shelf with hidden fasteners

Almost any design solution for a modern interior is not complete without wall shelves. They serve a double purpose - they serve as a decorative decoration of the room and act as an additional surface for storing various little things, accessories or books.

fastening methods — The ways of fixing the shelves can be very different.

Depending on the purpose, the shelves can be light or massive, with a solid appearance. In this regard, they are able to withstand different loads, which affects the way the shelf is attached to the wall.

room interior — Often, the interior of the room implies minimalism, and in this case, external fastening may be unnecessary.

The use of external fasteners is not always an appropriate interior solution, for example, when implementing the concept of minimalism. Then, a shelf with a hidden mount becomes preferable.

Install corner shelf — You can install a corner shelf in any square room.

Content Hide

Advantages and disadvantages of hidden fasteners
How to properly attach a hidden shelf mount
Where and how to properly mount it on the wall
Video: shelf with hidden fastening
Options for shelves in the interior in the photo

Advantages and disadvantages of hidden fasteners

The main methods for hanging wall shelves include:

the mount is traditional, using various kinds of brackets, hinges, metal or wood racks;
hidden, secret installation method - without visible fasteners, while it seems that the shelves are floating in zero gravity.

The second method of installation is justified when the additional structural elements of the fasteners do not correspond to the general design of the decor.

On shelves — You can keep various items and literature on the shelves.

The advantage of hidden shelf supports is that they are completely immersed in the body of the rack, which ensures the invisibility of the fixing elements on the wall.

Working holes — Work holes are drilled in the areas where you plan to place the shelf.

Today, thanks to the invisible effect, such shelf supports are gaining more and more popularity. But they also have disadvantages.

Such a shelf cannot be subjected to loads exceeding a weight of 20 kg. Also, taking into account the peculiarities of mounting the shelf holder in the thickness of the shelf, the thickness of the board should not be less than 2.5-3 cm.

shelf assembly — Many designers point out that the hidden way of mounting the shelf is the most relevant.

In addition, if the thickness of the wall partitions does not exceed 10 cm, the suspended structure with built-in shelf supports can only be used as a decorative one. Because it is unlikely to cope with heavy loads and can collapse.

How to properly attach a hidden shelf mount

There are different types of mounting devices in order to hide the shelf fixings.

carpenter's tools — Certain tools are required to secure the shelves.

They all fall into two main groups:

Hinged hinges. They are used for hanging products from plywood, wood or chipboard. Such fittings are attached to the shelf from the back, in special recesses or cuts, the depth of which corresponds to the thickness of the hinges, and after installation they do not protrude beyond the dimensions of the structure.
Mounting holders. This is a type of cantilever mount that includes a metal bar and a bracket for mounting to a vertical surface.To install the device, from the rear side of the shelf, in the thickness of the material, holes are drilled, the diameter and depth of which correspond to the dimensions of the rod. Usually, the mensolder has the following dimensions: diameter 10-18 mm, length is selected 20-50 mm less than the width of the shelf. To hide the mounting brackets, grooves equal to the thickness of the fittings are made from the end of the rear side of the shelf.

Natural wood has been used to create furniture for many centuries.

The type of fastening is selected depending on the strength of the wall, the dimensions of the hinged structure and the expected load on it.

Where and how to properly mount it on the wall

Wall mounting technology for hinged hinges:

We measure the distance between the centers of the hinge holes.
Using the building level and a ruler, draw a horizontal line at the required height from the floor, on which we mark the places of future holes for installing the holders. The distance between them is equal to the measurement result in item 1.
We drill holes and, depending on the wall material, drive plugs or plastic dowels into them.
We screw in the screws in such a way that the gap between their caps and the wall allows the hinged mechanism to be placed.

hinge centers — For correct installation, it is necessary to accurately determine the distance between the centers of the hinges.

Method for installing shelves using mens holders:

For installation of brackets-holders on the wall, the first steps are similar to the actions of items 1-3 of the previous technology.
We attach the brackets to the wall with self-tapping screws, screwing them into the prepared holes.
We mount the shelf by pushing it onto the metal rods of the menswear holder, carefully and without distortions, tapping it with a rubber mallet from the side of the front part.

The simplest is the console mounting method, where metal rods are used as a console, which are hammered into the walls with one side, and a shelf is placed on the other. The length of the rod is equal to at least 1/3 of the shelf width plus 10-15 cm for fixing in the wall.

Concealed shelf supports create additional storage space with minimal interference with interior design.

It is easy to cope with the installation of a hinged structure on your own, the main thing is to choose the right fittings for hidden fasteners in accordance with the required load.