Diy wood gazebo table

Every summer resident knows that a suitable space should be organized for feasts. If there is a gazebo on your site, then it can be perfectly adapted for this by installing a table in it. The right approach will make it not just a decoration, but also a place to relax. In addition, you can save a lot by making a table in a gazebo with your own hands. You will find out how to do this in our article.

table in the gazebo in the country
You can make a table in the gazebo in the country with your own hands.

What is a table in a gazebo for?

Outdoor recreation is especially pleasant in a comfortable place that will protect you from the scorching rays of the sun and rain. The gazebo fits perfectly into the garden and courtyard interior, creating an atmosphere of comfort and coziness.

table in a cozy gazebo
The gazebo in the yard always creates a cozy atmosphere.

Having assembled a table for a gazebo made of wood with your own hands, you will save yourself from unnecessary stress. It will no longer be necessary to carry furniture from home to the street all the time, which often appears in the warm season.
garden table
Such a table allows you not to constantly carry dishes from home to the street and back in the summer.

Varieties of tables in the gazebo

The appearance of country furniture is limited only by your imagination. You can even make a table from scrap materials left over from construction or repairs. It can be mounted on regular legs or on a solid base.

gazebo table shape
The shape and appearance of such a table can be absolutely any.

If you decide to make a table in a gazebo made of wood with your own hands, then it is better to buy only well-dried boards. Moisture over time leads to drying out and deformation.

Round

This shape visually enlarges the space and gives it aesthetics. The leg of such a table can be one massive stand with a well-fixed cross at the bottom, or it can stand on four legs, which are located in the corners.

round table for the gazebo
The round shape is one of the options for the gazebo table.

Seats or chairs must be installed around it, making sure to organize the possibility of a passage between them.
setting up a round table
Chairs or benches are installed around the table.

Hexagon

Suitable for a gazebo with pointed and strict elements. Guests at such a table will feel more free than at a round one.

hexagonal gazebo table
At such a table, guests will be more than comfortable.

For a beginner, this option may seem very difficult, but in fact it is not.
gazebo table hex
It is not so difficult to make such a table yourself.

Square

The simplest, most practical and functional option.

gazebo table square
The square-shaped table is one of the most comfortable and functional.

A square or rectangular wooden table and a gazebo bench should be the same length. This form will easily accommodate a large number of people.
gazebo table rectangular
A large number of guests can always be seated at a rectangular table.

Decorative

The table can be decorated with various animal figures, ornaments and patterns.

decorative tables
These tables can be decorated with various figures and ornaments.

You can show your imagination or look at ready-made options on the Internet. Specialty stores also sell ready-made decorations for tables and benches made of a variety of materials.
decorative table for the gazebo
The form of decorative tables can be absolutely any.

How to make a table with your own hands

Having decided on the type of furniture that will decorate your gazebo, you need to start realizing your idea. But don't just run for the tools right away.

DIY table
Making a table for a gazebo with your own hands is real.

Prepare materials, tools and make a drawing according to which you will work. Only by properly organizing the process, you will quickly assemble the table.
DIY table collection
In order to finally assemble the table correctly, you need to properly organize all the work.

Drawing creation

Any work must start with planning. When you have a suitable idea for the table in your head, you need to transfer it to paper and work it out well.

example drawing for a hexagonal table
Drawing of a hexagonal gazebo table, which can be taken as an example.

The drawing must be clear and accurately reflect all the metric characteristics of the object. First of all, you need to specify in it:

  • Dimensions (height, length, width, etc.).
  • Configuration (position of elements relative to each other).
  • The shape of the table.
  • The junction of fasteners (screws, etc.).

example drawing for table
An example of a drawing of a rectangular table for a gazebo.

If you absolutely do not know how to make a drawing, then you can use a ready-made version from the Internet and remake it to fit your needs. It is made by hand on paper or in special programs (AutoCad, ArchiCad, 3DMax, etc.).
detailed drawing of wooden table
Sample detailed drawing of a small wooden table in a gazebo.

Building material and tool

When the drawing is ready, you can start making furniture for the gazebo from wood with your own hands. Buy planks from a hardware store or lumber warehouse. Pine and hardwoods work best.

boards for a table in a gazebo
It is better to choose boards from hardwood or pine.

To process them, you need the following tools:

  • Grinder.
  • Jigsaw.
  • Screwdriver.
  • Hacksaw.
  • Fraser.
  • Roulette.
  • Fasteners (studs, nuts, screws, fasteners, etc.).
  • Adhesive (PVA, two-component, for wood, etc.).
  • Paints and varnishes and sponges with brushes for their application.
  • Sandpaper (P80-P240).
  • Primer.
table tools
Of course, a certain set of tools will be required to make a table on your own.

Also, do not forget about the means of protection. Gloves and glasses should be available not only for the master, but also for the amateur.

Countertop manufacturing

It is necessary to prepare the boards for processing. Examine them carefully for defects or defects. The thickness of the board for the table top and benches must not be less than 30 mm.

tabletop board
The thickness of the boards for the table top must be at least 30 mm.

Choose the length at your discretion, based on the number of people at the table. The most optimal usually ranges from 1.5-2 meters.
table board length
The length of the boards can vary between 1.5-2 meters.

To make a countertop you need:

  1. Process the boards. The tree needs to be planed on the machine, and then sanded with sandpaper on the sides and from the end. Remove dust and apply a primer.

    It is necessary to process absolutely all the details for the future table in the same way. This will prevent rotting and damage by parasites. The better the tree is prepared, the more beautiful and quality it will be a table for your gazebo.

  2. Place the boards on a flat surface with the back side up. If you want to make even spaces, you can place regular pencils between them. They will prevent water from accumulating on the surface.
  3. Tie the countertop with bars. First of all, nail the end bars, and only then do the bottom side. The distance between the bottom end bars should be approximately 40-45 cm.

how to make a table top for a table
With the right approach, making a countertop will not take long.

You can fasten them with self-tapping screws or special ties for furniture. To make the table look more aesthetically pleasing, the hats are buried in the wood.

Making and attaching legs to the table top

In order for the table structure to be reliable and stable, you need to make a frame.It is assembled from four boards, forming a frame, and legs are installed on its sides.

fastening the legs to the frame
The legs are installed on the sides of the frame.

The order of work is as follows:

  1. Make a frame. Mark up and drill guides for screws or corners. Observe the perpendicular position of the frame boards. Coat the ends with glue and fix with self-tapping screws. To prevent the wood from cracking, it is advisable to prepare the holes for the screws in advance. Make sure that the heads of the fasteners are completely immersed in the boards.
  2. Connect the frame and table top. Make a mark for yourself before mounting. Furniture corners, screws and glue can be used. Place the worktop with the frame attached to the rail on a workbench or other flat surface and connect to the worktop. Install the legs at the corners of the frame.
  3. Give the product a finished look. Polish up all imperfections, cover it with several layers of varnish (at least 2-3) or paint.

x-shaped table legs
If desired, x-shaped legs can be made for the table.

If you do not like the design of a classic table, then you can make it on X-shaped legs. This requires:

  1. Prepare 4 planks by cutting their edges at an angle of 52 degrees.
  2. Place two planks inside the worktop so that the legs can fit.
  3. The legs should be laid on a flat surface and crossed at an angle so that their width matches the width of the table. Mark with a pencil or chalk the place of their intersection at the level of the plane.
  4. Thoroughly coat with glue and secure with self-tapping screws. Cover with varnish and leave to dry completely.
  5. Place in the grooves prepared in advance and attach to the table.

The role of the gazebo in the design of the cottage

Every person wants to have their own private corner for relaxation. Equipping the gazebo with a table, you will make for yourself a comfortable place to relax in nature and you will be able to spend most of your time outdoors.

gazebo with a table in the country
If you wish, you can equip the gazebo with a table yourself.

Assembling a table for a summer residence is not difficult at all, so do not worry if you are not at all versed in the manufacture of furniture or carpentry. The main thing is to organize the process correctly.

Video: how to quickly make a simple table into a gazebo yourself

Examples of tables in gazebos in the photo

Furniture

Kitchen

Life hacks