How to remove blinds from a window

Blinds and roller blinds have long been included in office use. They shade the sun well and at the same time do not make the room completely dark. The blades of the blinds can be easily adjusted to the desired level of lightness.

Blinds
Blinds are so convenient to use that they have replaced curtains in all offices and many apartments.

But the day comes when the structure needs to be disassembled in order to clean it of dust and dirt. How to remove roller blinds from a window in order to wash this article will tell.

How to remove blinds from a window (detailed instructions for each type)

Before dismantling the blinds, go over them with a vacuum cleaner and a rag in advance. Otherwise, all the dust that has settled over a long time will rise in a column in your apartment.

horizontal blinds
Horizontal blinds are popular in residential apartments.

Learn how to remove the blinds from the windows will help the instruction. Most of the constructs are intuitive and work according to certain algorithms.

Dismantle vertical blinds

How to disassemble vertical blinds?

blinds orange
The vertical slats are much easier to remove.

During installation, such models are put on the cornice, which in turn is closed with a plug. This is convenient for securing the entire structure so that the panels do not fall to the floor during use.

plugs
It is necessary to remove the plugs and carefully pull out each element in turn, carefully folding it.
  1. Find the plug on the cornice and pull it out.
  2. Pull on the common connecting chain to pull out all louver blocks.
  3. If possible, open the lamellas so that they are located one after the other and folded when dismantled, like a deck of cards.
  4. After pulling out the chain and weights, remove the sipes one by one.
  5. If the material allows the blinds, you can wash them in the washing machine.
  6. If not, clean with a brush dampened with blind cleaner or soap and water solution.
Detach the blinds
Detaching the blinds is not difficult.

Remove horizontal sashes

If the vertical arrangement of blinds is often used in offices, then at home you can most often find horizontal models. How to remove such blinds from the window to wash? Lamellas are usually made of metal that bends easily and forms creases.

type of blinds
This type of blinds are made of plastic.
  1. In the area of ​​the upper bar, find the fasteners that disconnect the lamellas from the structure.
  2. Use a screwdriver or other handy tool to detach the panels from the metal clips. Pull down slightly and then toward you.
  3. If you come across a model with plugs, you must first remove them.
  4. The same applies to cover plates and panels that have a decorative function.
  5. Dismantle the entire mechanism.
  6. Avoid tangling or twisting the planks.
Plastic eyelet
The plastic eyelet is slightly raised and tilted to the side, then pulled out with a sharp movement.

Wooden

Wooden blinds are usually not removed for cleaning. Environmentally friendly wood does not like moisture and only requires dry cleaning. But if you urgently need dismantling, arm yourself with a screwdriver.

the construction is long,
If the structure is long, it is better to ask for help, since it will be rather difficult to hold it alone.
  1. If the blinds are attached to the wall or ceiling, you will find the fasteners at the topmost plank.
  2. Pull the clips towards you or unscrew with a screwdriver, depending on the model.
  3. Stack the planks one on top of the other to prevent them from scattering or getting damaged.
  4. Clean the lamellas with a vacuum cleaner, wipe with a dry brush or cloth.
Wooden blinds
Wooden blinds have many benefits.

Roll

Roll designs are convenient with an affordable fastening system on magnets or on strips of adhesive tape.

Roller blinds
Roller blinds are usually not removed, as they are not recommended to be washed.
  1. Unhook the fasteners from each other. If the system is supported by scotch tape, then pick up its edge with a knife or scotch tape.
  2. Remove the protective plugs and locate the pivot mechanism.
  3. Pull out gears and rollers.
  4. Remove the roll cassette.
rolls
In most cases, rolls are fixed with tape or magnetic strips.

What to do if the mounts are broken

There are many small parts in the blinds system that are responsible for a certain part of the work.

details
Some parts will have to be bought if they are broken.
  1. If a plastic chain breaks, you can buy it at a specialist store. To replace it, remove the plug and gear, pull out the damaged fragment of the chain and replace it with a new one.
  2. To replace the slider, you need to remove the control mechanism, pull out all the sliders. Place the distance in the new part and reassemble the structure.
  3. The shoulder can be easily replaced with a new one. It is important to buy the same, similar to the length and width of the lamella.
  4. Retainers and fasteners are available from your hardware store. Make sure the parts fit the blind system.
blinds fittings
Be careful with your blinds.

How to properly wash your blinds

It is necessary to wash and clean the blinds according to the instruction manual. Fabric slats can be machine washed, and wooden ones will only have to be cleaned with a vacuum cleaner.

blinds washers
There are special devices for cleaning blinds.
  1. Do not use water for dry cleaning. Purchase special brushes and sponges for cleaning the lamellas. They are good at collecting dust, retaining it and not spreading throughout the room. Start wiping from the top bar, gradually moving to the bottom.
  2. Washing with detergent is a favorite method for many owners. Soapy water perfectly removes dust and dirt, eliminates unpleasant odors, gives the blinds a radiant look. Dissolve some laundry soap, dish gel or washing powder in a bowl of warm water. Then rinse with clean water and wipe the slats dry. This method removes even the most stubborn stains and dirt.
  3. Window cleaner is also suitable for cleaning planks. Close the blinds so that all the slats are horizontal. Spray them with window cleaner and wipe dry with a clean sponge or tissue. This cleaning method is quick, but requires a lot of rags or paper towels.
  4. The easiest way is to clean the lamellas with disposable wet wipes. Buy multiple packs and use one at a time. This method is good when you have one small window with a small number of planks.
  5. The steam generator can handle the most stubborn dirt. It does not spoil the surface of the slats, it is suitable for all types of blinds, except for wooden ones.
  6. If your blinds are made of wood, use special polishes, waxes and other furniture care products made of such material.
funds
Use special cleaning agents.

How to hang back

The blinds are assembled according to the same principle as they were removed. The whole process takes place in reverse order.

examine the blinds
Before you start to deal with accumulated dirt, you need to carefully examine the blinds.

First, put the slats on the mountings, then insert the gears and fix the plugs. It is important that blinds or blinds are dry.

Otherwise, they can attract even more dust and dirt while hanging. Close windows tightly so that street dust does not settle on the slats.

Care Tips

Find out in advance where you can buy fasteners, parts or individual panels to replace in case of malfunction.This will save time on searches and help you quickly navigate in an unforeseen situation.

Good care
Good care will prolong the lifespan of your blinds.

There are also a number of tips for caring for your blinds so that they last as long as possible:

  1. Try not to choose fabric blinds for your kitchen. They quickly absorb grease, moisture and odors. Stop your choice on metal or plastic models. They are less demanding to care for.
  2. Try to clean the slats regularly. Clean dry or wet at least once a season. So you will remove dirt in a timely manner and prevent dust from accumulating.
  3. If you are not sure if you can properly dismantle and hang the system, limit yourself to a vacuum cleaner for cleaning.
  4. If the material allows, wipe the panels with a special compound that repels dust and dirt. This will help the blinds stay clean for a long time.
  5. Avoid kinking or kinking plastic, aluminum and metal panels. Better just replace them with new ones.

The blinds are comfortable and practical. They help regulate the lighting in the room and block out the bright rays of the daytime sun. To prevent the assistant from becoming a large-scale dust collector, regularly inspect its condition and clean it in a timely manner.

Video: how to remove horizontal blinds

Furniture

Kitchen

Life hacks