We transfer plastic windows to winter mode

Plastic windows are increasingly being replaced by standard metal-plastic PVC because of their ease and accessibility to use, as well as modern beautiful fittings and perfect appearance. Euro windows are an excellent option for replacing old wooden ones.

plastic euro windows — Plastic euro-windows have been replaced by wooden ones.

The multifaceted possibilities of plastic structures allow you to use different options for work. But the transition from one mode to another is carried out with special tools. If we take into account the functions of winter and summer, then you can see what are the differences between them.

switching windows to winter mode — Not everyone knows that windows can be switched from one mode to another.

Content Hide

Varieties of window modes
How to transfer plastic windows to winter mode
What are the mistakes
Helpful advice
Video: how to transfer plastic windows to winter mode

Varieties of window modes

What is the main difference? How do they differ from each other?

Basic moments:

the location of the thread of the regulators in the desired direction;
penetration of the required amount of air in a certain season;
completeness of adjoining window doors to the frame bar (in winter - denser, in summer - freer, and in the center during autumn-spring).

differences between window modes — Window modes differ in several ways.

For convenience, comfort in use, switches are specially designed.

Winter

The tightly pressed window frame to the structure guarantees low penetration of cold air in winter. This helps to keep the home warm. You can minimize the amount yourself using special tools.

Summer

Allows air to flow freely and provides the necessary ventilation of the room.

Standard

The intermediate one allows the middle pressing of the window sash to the frame. Double-glazed windows in standard mode will not fail either in winter or in summer. By creating conditions for maintaining the desired heat or humidity.

You can independently customize the design options depending on the season. The amount of air entering the room directly depends on this.

The winter one is smaller, the sashes close tightly with the frame, the summer one contributes to greater penetration, during the transition a gap is formed for more quantity to enter the room, and the standard one is the golden mean, the thread is in the center and the amount enters just enough to get the required amount of moisture. It is these points that are considered the main differences.

adjusting window modes — You can adjust the window modes yourself.

How to transfer plastic windows to winter mode

Windows lend themselves to self-change of work. Anyone can carry out this process and set the desired option. This does not require special skill, but skill and clarity in use. To do this, you need a hex wrench, pliers, etc.

change window mode — Changing the window mode is quite simple.

Step-by-step instruction

A special mechanism for the jumper is called a trunnion. Often star-shaped, screwdriver-hole or rounded.

window switching mechanism — The mechanism for switching window modes is called a pivot.

How to proceed:

Thoroughly clean the seal from dirt and dust. Dirt particles should not get into the elements for moving the window sashes.
First you need to clean the mechanism from dirt.
Determine where the required mechanisms are located. In most cases, there are three of them: below, above and in the center. When changing, you need to switch all found. But in some designs, there may be a bottom or top of the sash.
You will need to determine where all the switching mechanisms are located.
Find the designation where it is indicated in which direction the trunnion should move. Each, as a rule, has a picture pointing in the right direction.
It is necessary to find the designation of the side of movement of the trunnion.
Turn the mechanism in the direction as shown in the picture until it stops.
Turn the mechanism until it stops.
If in doubt, you need to make sure the mode change is correct. Check again if there is a distance between the frame and the sash, then this is winter, if it is centered, then standard, and if the gap in terms of pressure is huge, then the window frame is in the summer version.
You can understand which mode the frame is in by the size of the gap between the flaps.

Lubricate the mechanisms with special machine oil, if you notice that the mechanism works less flexible, repeat the lubrication of the elements again. They must function properly so as not to damage the window structure.

lubrication of window mechanisms — For the mechanisms to function properly, they need to be lubricated.

Rotation of the thread inside the trunnion is carried out with a special tool. The hexagon will help to make, set the switch to winter and change to summer.

hex wrench — The rotation is carried out using a hexagon.

Winter mode

How to convert plastic windows to winter mode using a hexagon?

If you open the sash of the window, then around the entire perimeter you can see iron round inserts - pins.

Each such trunnion has a thread in the center for a hexagon.

hexagon thread — Each trunnion has a hexagonal thread.

It is necessary to insert the hexagon into the center and turn it as far as it will go so that the adjustment is directed towards the seal.

In one casement, most often the pivot is not one, but the rest must also be translated.

several pins on the sash — Usually there are several pins on one sash.

By adjusting the shutters close to the frame, this is the winter mode - additional insulation from cool air, due to the tight fit of the two component parts.

difference in winter mode — The winter mode is distinguished by the tight fit of the window components.

In order to find out how close the design is one to one, you need to insert a piece of thick paper. So you will see how tightly the frame fits to the window.

An alternative hexagon is a regular screwdriver, but care must be taken when choosing threaded tips.

a screwdriver instead of a hexagon — In some cases, you can use a screwdriver.

Pliers can also be used to switch modes. If you skillfully grab the trunnion and turn in the right direction, it is best for such purposes to use a tool designed for certain types of windows.

Attention! If you use items that are not intended for change, then you can lead to damage to the structure. Be careful and follow the instructions of people with experience in use.

Summer mode

Adjusted winter is not difficult to switch to summer. Move the hexagon in the opposite direction 90 degrees, you get a summer one. Note that the shutters are not close to each other, which means that the amount of air in the room will get much more.

Important!
Turning towards you until it stops - switching to winter, and vice versa, if you do not fix it completely, then setting to summer.

An additional key for changing can be a screwdriver. But not everyone can match the shape of the trunnion thread.

What are the mistakes

In the first year, use a permanent standard regimen. Window fittings wear out quickly and do not need to be switched from one mode to another unnecessarily.

first year in standard mode — There is no need to change regimes in the first year.

Do not use unsuitable objects to translate the journal.

Try not to scratch the window fittings with hexagons and pliers. To do this, it is important to rotate the bearing in the right direction.

hardware scratches — Try to avoid scratching the hardware.

Note! Try to protect small construction details. The service life of the euro windows and elements depends on this.

Conclusion: You need to take care of window fittings and avoid mistakes in use. Otherwise, it will quickly fail, and it will be necessary to change frames, sashes and other parts.

use of window fittings — If you use the hardware incorrectly, it may fail.

Helpful advice

Avoid using summer mode in winter and winter in summer. Windows with the ability to transition from one state to another are specially designed for a certain period of the year.