Do-it-yourself upholstery of a computer chair

A computer desk should be not only correctly selected in height and width, but also comfortable. The word “comfort” contains a lot of factors: seating comfort, correct backrest, required height and cleanliness. The case when an item wears out, it can be pulled over from the comfort of your home.

hauling a computer chair at home
If the material on the chair is worn out, you can renew it yourself.

Features of the computer chair

The main feature of the chair is its practicality, comfort and absence of harm to health. Before buying, pay attention to the material and structure.

  • Choose a strong frame, such as metal or polyamide.
  • A stable and practical base. It is a 5-beam base with rotating rollers along its axis.
  • Convenience should be complemented by the possibility of smooth rocking, rotation along the axis, height adjustment and a powerful gas cartridge.
  • The backrest is of good quality when it follows the curve of the back in the lumbar region. A bonus will be the presence of fixing the tilt level with a backrest tilt adjuster, depending on the weight of the seated person.
  • The back should not be too low. The best option: either at shoulder level or above the head.
  • Do not forget about the comfort for your hands, it is provided by the armrests.
  • The color scheme and fabric or leather depends on the personal preference of the seated person.
choosing a computer chair
You need to choose a computer chair, taking into account certain criteria.

All these factors are important when choosing an item not only for the home, but also for the office. Comfort and a healthy back should be there in any case.

How to drag a computer chair with your own hands

Manual padding has quite a few advantages over the work of a wizard. But if you do not have the slightest desire to try how to pull an old computer chair with your own hands, then it is better to give it to the workshop.

chair upholstery professional
If you are not confident in your abilities, it is better to contact a specialist.

Fitting all parts will take about 60 minutes of free time.

Taking measurements

To measure the parameters of a highchair, you should pay attention to their width and length. If the foam is rubbed off and needs to be replaced, add another 5 cm on each side.

stool measurement before constriction
First you need to measure all the parameters of the product.

For the convenience of work, you can remove the backrest, detach the old upholstery from it and, based on this, make a new one. Similar actions are performed with the seat.

Necessary materials

The appearance of the chair depends on your preference. However, don't choose:

  1. Artificial leather. From frequent friction, it will lose its appearance.
  2. Thin fabrics. Are prone to damage from sharp objects, they can even be decor on clothes.
computer chair webbing material
The material for the waist must be strong.

Sitting on a chair, you want it to be comfortable and soft to sit on. This will help the foam filler. Available at seamstresses. It is important to remember that between the fabric and the foam rubber, you still need to lay a synthetic winterizer.

Tool selection

To know how to cover a computer chair with a new fabric and do it yourself you need to choose tools. It is impossible to perform such actions with bare hands. To do this, take the minimum set:

  • Screwdriver. They will disassemble the structure.
  • Scissors. Will be needed for trimming fabric.
  • Furniture stapler and staples.
computer chair retractor tools
Instead of a screwdriver, you can use a screwdriver.

This will be enough to guide the entire process.

The constriction process

In the process itself, it is necessary to ensure access to all parts and the convenience of working with them. You will have to take turns disassemble the chair, draw the material and drag it to the right place. All in all, 3 easy steps and the result is ready.

computer chair retraining process
The constriction process consists of three simple steps.

Important! Do not forget about the safety precautions of using tools when you tighten the thing.

Removing the elements of the chair

The chair itself consists of: a backrest, a seat, armrests, a base with wheels. We will not need to unwind the last part. After all, the challenge is to change the upholstery, not the wheels. Although, a similar need may arise when you need to pull one of the types of office chairs.

computer chair structure
A computer chair consists of several parts.

We remove the back. There is a screw with a large head at the bottom. If you pull on it and open the latches, then the back panel can be easily removed.

removing the back of the chair
The backrest must be detached from the seat.

Removing the seat is much easier. It is necessary to turn it over and unscrew the armrests with a screwdriver.

parsing a computer chair
Further dismantling is easier, and the wheels do not need to be disconnected.

Remove the old upholstery by unbending the staples. At the same time, choose one neat place or even a box where you will put the removed screws. Otherwise, they will be lost, and the reassembly process will be delayed.

removing the old chair upholstery
The old upholstery must be removed by unbending the staples.

Cutting material

Start by cutting out the foam. Lay it out on the floor, cover it with a seat on top, circle and cut along the contour. Do a similar process with the fabric. Don't forget about allowances. Since the seat of the chair is round, this may require more fabric. We do similar actions for the back and for the padding polyester.

foam rubber for computer chair seat
You need to put foam rubber in the seat.

Chair upholstery

How to change the upholstery on a computer chair with all the materials and tools available? Replacing the old coating with a new one starts with removing the old fabric.

New cut-out elements must be attached to the parts of the chair. We bend them on the back and fix them with a stapler. It is important to work carefully with the staples so as not to injure yourself. The allowances were needed so that, having collected the entire "sandwich" of padding polyester and foam rubber, there was enough fabric for the sheathing.

We do similar actions with the fabric, both with the back and with the seat.

Fastening the fabric

During the fastening of the fabric, the so-called ponytails may remain. These are the allowances that were left in order to have enough fabric. They need to be cut.

trimming tails on a chair
The remaining tails must be trimmed.

Assembling the chair

After the fabric has been stapled, the excess is trimmed, you are left with the task of assembling the chair back. Installation is carried out in exactly the same way as dismantling, only in reverse order. This is where advice on storing screws in a box comes in handy.

Start by assembling the seat, screw on the armrests. Next, assemble the frame and fasten it with screws. The last step is the backrest action. Snap the back cover from the front.

assembling a computer chair
After completing the work, the chair is assembled in the reverse order.

The final stage

As a result, when all the components have changed and everything is assembled. Replace the base, check the chair for comfort.

stool check
Finally, you need to test the chair for comfort.

How to avoid mistakes

It is almost impossible to make mistakes in such an easy process. But if this is your first time doing this, pay attention to:

  1. Correctness of measurements.
  2. Do not forget about the allowance. If there is more fabric left, it will be possible to cut it off, than there will be less, and it will not be able to cover the entire area of ​​the part.
  3. Take care of the storage of all removed parts.
  4. Choose the right upholstery that will stretch and be comfortable to work with.
  5. If you are worried and find it difficult to remember the sequence, you can use your smartphone. Take a photo of each step taken and at the end, you will carry out the assembly proceeding from the opposite.
computer chair restraint rules
In order to avoid mistakes, it is worth adhering to certain rules.

The whole thing depends on your attentiveness and accuracy. And it is quite possible, being a beginner in such a business, you can do everything without mistakes the first time.

Advantages and disadvantages of self-stretching the chair

Every job has something good and something bad. If you look at the positive aspects of the process, then do-it-yourself office chair hauling has the following advantages:

  • No need to go anywhere and carry a chair.
  • Significant financial savings.
  • The ability to choose the upholstery you want.
  • The duration does not exceed 60 minutes. And this is in the case of the slow beginner. If, however, you are more active, you can cope with all the processes in half an hour.
  • No special tools required. What you need can be in the house, or in extreme cases, ask your neighbor for an hour.
the advantages of do-it-yourself chair upholstery
There are many advantages to pulling furniture yourself.

It is difficult to single out something among the shortcomings. Unless, for you, any mechanical work is new and difficult. Then, it will be your individual disadvantage.

Features of the chair cover

When living alone or with someone, there is always a risk of staining the furniture. The factor of having pets is added to the risk. Contamination can again cause the chair upholstery to be changed.

How can you avoid this process? Use a case. It is better not to forget the parameters for measuring the parts of the chair, you will need them. There are different covers, a cape is suitable for a computer chair. To order from the online store, you will have to remember the required parameters. With their help, it will be possible to pick up a cape, it can be an euroncape with elastic bands, if the measurements are standard.

computer chair cover
A cover can be used to avoid contamination.

If the chair has other dimensions, you will have to either sew yourself, or give a similar request to the atelier. Choose the color and type of fabric to suit your tastes, but do not forget that the cover must still be well cleaned.

custom computer chair cover
You can either buy the cover, sew it to order, or make it yourself.

Chair care rules

Regardless of whether there is contamination or not, you still need to take care of the chair. Follow these simple rules:

  1. Do not eat at the computer desk. This is positive for both the computer equipment itself and the furniture.
  2. Pay attention to the wheels from time to time, they need to be wiped from dust and lubricated so that the sliding remains normal.
  3. It is also not worthwhile to unnecessarily rotate and roll on a chair, bending the back. This is harmful to deterioration of the elements of the chair.
  4. When washing the chair, do not use excessive amounts of liquid, this will cause the upholstery to stretch.
  5. Wash dirty stains gently with soapy water. All stains should be washed from the edges of the dirt to the center, so as not to spread it over a large area.

Everything that is done with your own hands is a pleasure and looks no worse than the work of a professional. In addition, you can know exactly what materials were used, and which step after which you did it.

Video: how to drag a computer chair with your own hands

Furniture

Kitchen

Life hacks