Fixing the E15 error on the dishwasher

The dishwasher irritates the hostess during a breakdown. Fix the problem yourself or call the wizard? What should you pay attention to first of all in order to save your equipment from similar troubles in the future?

error e15
Many users of this technique are confused by such an event.

Because of what error E15 may appear

Error E15 means that the system leakage sensor has worked. Water appeared inside the equipment, which got into a special sump.

error e15 in the dishwasher
Error E15 reports a problem with the Aquastop system; water has leaked into the pan of the car.

This can happen in several cases:

  • malfunction in the leak detection system itself;
  • a large amount of garbage or food debris has collected in the drain tract;
  • violation of the tightness of the pipe or seals;
  • breakage of the water spray or clogging of its holes;
  • using an unsuitable, excessively foaming detergent.

The appearance of an error with the E15 code is always accompanied by the flashing of the "water tap" icon. As a result, the foam float marker of the sensor is triggered and the leakage protection system is activated.

error e15 in the dishwasher
If the E15 error code lights up on the display, do not rush to call the wizard. Take the instructions for the dishwasher and read it carefully.

The drain pump automatically starts to work, which pumps out water in order to avoid short circuits and equipment breakdown. It happens that, despite the error, the pump continues to work. In such cases, it is better to disconnect the dishwasher from the power supply so that the working parts do not burn out.

error e15 bosch
Modern dishwashers can diagnose their systems on their own.

Error diagnostics

First of all, read the technical manual, which lists all possible error codes and the reasons for their occurrence.

error codes
Well-known German manufacturers - Bosch, Siemens, Neff - give a decryption of alphanumeric combinations that appear in case of malfunctions.

Inspect the machine carefully to see if there is water leakage to the outside. If the cause was minor malfunctions, for example, clogged litter, you can fix the breakdown yourself.

dishwasher clogged
The most common mistake of users is untimely cleaning of the filter from food debris, napkins and other foreign objects.
  1. Close the inlet valve to keep water out.
  2. Disconnect the drain and water supply hoses.
  3. Tilt the dishwasher forward carefully.
  4. A leak will be indicated by water pouring out of the sump.
  5. If the bottom of the machine is dry, it may be necessary to fix it in the area of ​​the contacts or the control module.
  6. Find the leak. To do this, run the dishwasher in test mode after removing the outer panels.
  7. The dishwasher must be dried within 24 hours after pumping out the water and eliminating the malfunctions.

Self-correction of the error (when the tap is on the screen)

The leakage system may have worked incorrectly and zeroing is required. To do this, press the main start button and hold it in this position for 20 seconds. The system will reboot and start working. You can unplug the machine for half an hour to reset all settings and reboot the control unit.

reboot
A factory reset is the first thing to do. It is quite possible that after rebooting the PMM, its operability will be restored.

On a Bosch typewriter

  • Error e15 in the bosch dishwasher automatically turns on the system for pumping out the remaining water;
  • if the filter is clogged, in Bosch models it is located at the bottom;
  • Bosch machine is easily disassembled, body panels are removed for diagnostics;
  • there are two spray arms that can be easily removed and replaced with new ones.
clean the filter in pm
The spray arms are located at the top and bottom of the chamber. Use a screwdriver to press the retainer of each of the nozzles and remove them one by one.

Siemens

  • The Siemens dishwasher emits a sharp, attention-grabbing signal when the AquaStop system is triggered;
  • Siemens drain protection system is activated at any position of the wash compartment door;
  • the filter in the Siemens dishwasher is located in the center of the bottom and looks like a funnel;
  • to identify a leak, run a test wash and observe the result of work between the pallet and the washer;
  • the cold welding method is suitable for repairing a crack in the washing body.
dishwasher filter
Usually, it is enough to turn the glass 90 ° to remove, but in older models of dishwashers, the filter can be removed in a different way.

When you need to call the master for repair

If you are not confident in your abilities and technical knowledge, do not try to repair the damage yourself. The AquaStop system and the associated E15 error can have more serious consequences. For example, to burnout of sensors or a working plateau.

error e15 in PMM
When the anti-leakage system is activated, the drain pump is always activated. It pumps out water remaining in the dishwasher to prevent further flooding.

Such a leak requires a qualified inspection of equipment, a professional analysis of all the details and knowledge of the nuances of your model.

dishwasher inspection
If after re-enabling the E15 error again, check the reset algorithm in the instructions attached to the PMM.

Prophylaxis

Preventing damage is sometimes easier than fixing it:

  1. Hard water flows in the tap. It must be softened using special 3in1 products. This prevents the build-up of limescale and deposits on the dishwasher parts. This means that hoses and a drain system will last longer.

    dishwasher tablets
    Special agents designed to effectively soften hard water will prevent device errors.

  2. Thoroughly clean the dishes from food residues before loading into the machine. Otherwise, the filter quickly clogs up, which leads to breakages and water leaks.

    loading dishes
    When the filters become clogged, water does not circulate well during washing, an overflow occurs in the washing tank, and an error lights up.

  3. Wash and clean the strainer at least once a week. Do not allow it to completely clog.

    dishwasher filter photo
    If flushing the filter does not work properly, check the drain hose and drain for blockages.

  4. The working blades of the sprinkler can also become clogged and overgrown with deposits. Clean them from time to time from grease and scale. Use a fine needle or toothpick to check for clogged water supply holes.

    sprinkler
    In case of malfunctions, the Aquastop sensor is best replaced.

  5. Pay attention to the condition of the seals that retain water when washing dishes. Wash rubber parts with special products once every six months. Avoid using folk remedies to prevent the rubber from losing its elasticity.

    sealant in PMM
    Due to the wear of the seal, water during washing flows through the door of the dishwasher to the floor, from there flows into the pan and an error lights up.

In a bosch dishwasher, an e27 or e15 error requires a call to the master, who knows how to fix the situation.

e15 dishwasher bosch
Most of the problems that arise during the operation of dishwashers, owners can solve on their own.

Video: error e15 in the dishwasher

Furniture

Kitchen

Life hacks