Why the washing machine does not turn on and what to do at the same time

Automatic washing machines of the Indesit, Ariston and other models are equipped with modern electronics, which provide high-quality washing in different modes.

All household appliances are prone to malfunctions, but the most common problems are in the electronic part of the machine. One of the breakdowns: the washing machine does not turn on, the second: the program does not start. You can of course call the wizard for diagnostics. First, you can do the repair yourself, determine the causes of the malfunction and fix it. The following information will help you.

Causes and remedies for breakage

You need to search for the cause of the breakdown sequentially, starting with the simple ones that you are able to fix yourself. And in the future, for a complex repair, contact the master. Pay attention to the following reasons that affect the functioning of the washing machine.

Lack of electricity

The lack of power supply in the network may be the initial reason why the washing machine does not work. It is necessary to check the supply of electricity to the room where the washing is performed. Perhaps the following malfunction options take place:

• The electricity in your area has been cut off, you need to wait for the general connection.
• A short circuit has occurred and the safety plugs have tripped. Check the device in the dashboard; when it is turned off, lift the lever up.
• A power failure occurs when the body of the machine is energized. In this case, it is important to contact a specialist so that you do not get an electric shock. It is necessary at the end of the wash to unplug the machine from the socket.

Damage to the elements of the power cord

What to do if the washing machine does not turn on due to a faulty cord. There are damages and their solutions:

• A break in the power cord coming from the machine occurs with kinks and various loads. For diagnostics, you can use electricity measuring devices - a tester, a multimeter. Replace the damaged wire, connect with electrical tape or solder.
• Extension cord defective. Check its condition while the washing machine is running by plugging it in directly.
• The socket itself does not work. Plug in another test device. If it works, then the socket is working.
• Fork pins are loose. Tighten with a screwdriver.

Power button problems

Problems with the "Power on" button occur in washing machines Indesit, Ariston and other brands, in which power is supplied to this particular button. Its working condition is checked with a multimeter. Action: unplug the machine, leave the button in the "on" state. The current flows properly if the measuring device emits a sound, but there is no sound in the "off" position. The button must be replaced in the event of a malfunction.

Unit malfunction, board

A breakdown of an electronic module or programmer is one of the options why the LG, Samsung washing machine and other automatic washing machines do not turn on. A module is a complex part that makes it possible to regulate the control of the entire device. The microprocessor ensures the operation of all elements of the washing machine. This is a complex breakdown that can be fixed by a qualified technician with certain skills.

Having estimated your own strength, you can independently examine the control module and diagnose its breakdown. After removing the control panel, check the board (all the parts in sequence) for operability and, if necessary, contact the master for repair.

The locking system does not function

You can start the machine only after loading the laundry and checking that the door is closed. After the start of the program, the hatch must be blocked, if this did not happen, the drum does not fill with water due to the protection of a special mechanism that controls the operation of the blocking system.

It is important to follow the troubleshooting steps:

1. Choose the correct washing program. If you pressed several buttons at the same time or did not press the necessary ones, the program will crash.
2. Turn off the machine for a minute, turn it on again and repeat the steps. The fault will be cleared and the door will lock.
3. When the door is closed, a click is heard, but the machine does not start, check the lock with a tester. Please note that the check is carried out when the electricity is disconnected. The device checks the resistance at different ends of the lock. In the absence of sounds, the lock must be replaced, which you can carry out yourself.

Broken noise filter

A malfunction of the noise filter occurs in automatic machines of the Samsung, Lji and other types, in which the filter is designed to neutralize the radiation emanating from the machine and exclude its influence on the performance of other household appliances. With a long service life of the unit, the noise filter may fail, the current flow is disrupted, the electrical circuit is interrupted, and the washing machine does not work.

A tester will help you check if the filter is working properly. Remove the cover of the machine and use it to test the voltage (first ring the input - three wires, then the output - two electrical wires). If voltage is present at the input, but not at the output, then the noise filter must be replaced.

Internal wiring problems

Damage to the internal wiring may be the reason that the washing machine does not start, and the indicators flash randomly or light up all at the same time. It is likely that the wire has come into contact with the internal parts of the machine, this has led to damage or burned out the capacitor. What to do in this situation: check the wires with a tester and replace damaged ones if necessary.

Washing machine connection rules

What to do if the machine does not turn on at the first start. First of all, after purchasing washing equipment, you must:

1. Study in detail the instructions with all the footnotes, which describe all the points of the sequential installation and the first start of the technique.
2. Unscrew the transport bolts from the rear for securing the tank during transport and insert the plastic plugs.
3. Make sure it is properly connected to the water supply and sewerage system.
4. Open the valve on the inlet hose to allow water to flow into the machine.
5. At the first wash, it is recommended to use a small amount of detergent to remove industrial oil and dirt.
6. Select a program with a long cycle and press start.

The launch will be successful if you have completed all the steps correctly. If an important part is missing, the machine will not work. You have completed all the points, but the machine refuses to work, be sure to contact the master for help to determine the reason.

Washing machine care

Additional information of a recommendatory nature for users on the proper care of the washing machine in order to use the equipment for a long time is as follows:

• Use chlorine-free washing powders or gels.
• Do not overload the washing machine with laundry. Violation of this rule will lead to imbalance of the drum and rapid wear of parts.
• Regularly clean the drain filter from blockages.
• Load items into the drum after checking the contents of the pockets for different items.
• After finishing each wash, wipe the machine and do not close the door for ventilation in order to avoid the formation of various odors, mold and mildew deposits.
• Perform preventive cleaning to remove limescale from heating elements using special products (calgon, soda, vinegar, lemon solution).

Compliance with simple rules for the care and operation of the washing machine will guarantee you stable and high-quality operation of the equipment. The above information will help in solving difficult issues, and the machine will last a long time, and things will be clean and fresh.

Video: what to do if the washing machine does not turn on