Step-by-step instructions for self-disassembly and repair of a Samsung vacuum cleaner

Any thing has its own shelf life and its own capabilities for trouble-free operation. But things tend to break and do not need to be thrown away immediately.

Samsung models
Frequent repair Samsung models, motor power: 1500W, 1600W, 1800W.

You can fix the problem if you know how to disassemble a Samsung 1600w vacuum cleaner video will help. You need hands and knowledge of how to do it.

The principle and device of the vacuum cleaner

The range of vacuum cleaners is expanding. The main options are:

  • For dry cleaning;
  • with aquafilter;
  • washing vacuum cleaner.

The most common and lightest is a dry vacuum cleaner. The principle of operation of modern vacuum cleaners and old ones is the same.

After starting, all debris is sucked in by a vacuum blower. Once inside, the debris goes through several stages of filtration. Often, these are: at the debris inlet, in the engine section, and at the exit. Each step protects the vacuum cleaner from damage from large particles.

retraction power
The first sign that a filter is clogged is a drop in suction power.

All dust and dirt is collected in a special bag. They can be reusable and removable from paper. There are models of vacuum cleaners that use a container system instead of a bag. All the dirt settles on the walls of the container, and then the purified air also comes out.

The most common malfunctions

If it is not possible to give the vacuum cleaner to the master for disassembly and assessment of its condition, you can find out what you need to pay attention to in case of a malfunction. After problems appear, the first thing to check is the bearings, which help the engine run.

breakdown of the vacuum cleaner
The specialist can quickly determine the problem of the breakdown of the vacuum cleaner.

The sound that is typical for them: a sharp rumble, rumbling, burning, overheating of the case. In addition to them, attention is paid to the anchor and the motor brush. A common problem is that the hose does not draw in dirt.

vacuum cleaners
In vacuum cleaners, the hose is often frayed.

The reason may lie in a clogged hose, an overfilled dust bag, or a problem with the HEPA filter. Often there is a problem when the unit pulls air, but the debris does not pick up normally. The problem could be a worn brush or a bad roller position.

Motor breakdown
Motor failure is a serious problem.

If the equipment does not turn on and the electricity does not disappear, then the reason lies in: the protection against overheating or a malfunction of the power circuit, plug, wire, internal wires or a snag in the switch itself, or a snag in the switch itself. If the problem occurs with electronics, it is better to entrust this business to a professional.

in a professional service center
Only a professional service center will promptly repair your vacuum cleaner.

The indicator of this lies in the fact that during operation they found smoke, knocking out traffic jams, and a short circuit. This all suggests that the problem is focused on the short circuit inside the device. And frequent problems with collector arcing lead to rapid wear of the device.

 blueprints
Use the drawings to disassemble the vacuum cleaner.

Preparatory stage for disassembling the Samsung vacuum cleaner

You can notice a nuisance if you use the technique for some time. You know what sound is characteristic of your Samsung and the smallest changes in it or in the operation of the device will be noticeable to you.

Breakage of many parts
Breakage of many parts will cause financial problems.

A broken engine in a vacuum cleaner is noticeable by: intermittent sounds, throws out dust, smells burnt. If it is not possible to give it to the master, then disassembling the Samsung 1800 w vacuum cleaner with your own hands, videos and photos will be assistants.

What tools will be needed

Do you need to clean the dust bag or replace it? No special devices or skills are needed. They are needed in cases of problems with the motor, wires, board elements. They will be:

  • file;
  • awl;
  • pliers;
  • sandpaper;
  • vice;
  • construction knife;
  • spare connectors and wiring.
instruments
Use tools to disassemble the vacuum cleaner.

In cases of replacing small parts, you will not have to spend a lot. But to replace a large and expensive component, you can pay attention to an alternative. With the condition of good material from which it is made.

The sequence of disassembling a vacuum cleaner on the example of Samsung 1600w

Disassembly of any equipment begins with preparation. And the correct sequence. It is impossible to reach the heart of the device until we remove everything that covers it.

disassemble the vacuum cleaner
You can disassemble the vacuum cleaner yourself using the instructions.

You can open it like this:

  1. Disconnect anything that might get in the way and unscrew the case. With a screwdriver, unscrew all the screws, including the secret ones, can be near the buttons. After unscrewing all the parts that can hold the shell of the vacuum cleaner, remove it. If it does not work, inspect again, there may be hidden latches.
  2. Disconnect the electrical wiring. You can see it on the connectors.
  3. Remove the engine from the entire plastic case by unscrewing it from the bed.
diagnostics
Correctly performed diagnostics is the key to success.

Dismantling the engine

The heart of the vacuum cleaner has a step-by-step opening process.

  1. First you need to remove the impeller. But for this you need to perform certain actions. Remove the front of the cowl. Use a thin screwdriver to bend the side of the cover until the screwdriver enters the inside. Pull back the top of the cowl and the impeller becomes accessible.
  2. We unscrew the nut on the impeller.
  3. We remove the screws of the case, but by this time the brushes need to be removed.
  4. Pull out the anchor.
  5. Remove the bearing with threaded pullers.
Filters are clogged
Filters are clogged, debris is not drawn in well, there is an additional load on the motor and, as a result, it breaks.

How to repair a vacuum cleaner with your own hands

In order to independently repair all the elements of a Samsung vacuum cleaner with your own hands, you need to determine the place where it was formed. The motor may be disassembled if: there is a burning smell, poor dust suction power. Follow the sequence in removing the housing.

hose
Often the hose is clogged in vacuum cleaners.

The cause of this breakdown is often the poor operation of the brushes on the motor. You need to pay attention to them. If the hose or brush is clogged. We carry out their cleaning. First, remove the brush and check how the hose pulls without it.

vacuum cleaner tube
You can replace the vacuum cleaner tube with a new one.

If everything is ok, then you need to clean the brush. If not, you can remove the hose and follow the same steps. Often a large thing can get stuck inside: a chain, a watch. Clogged filters and waste bin.

filter replacement
You do not necessarily need to replace the filters in the Samsung vacuum cleaner if the device does not work well.

To determine, we take out everything, check the traction of the vacuum cleaner. If everything is in order, clean the filters. As for the replacement and repair of the motor, here you need to evaluate your skills and abilities. An example of this would be a broken motor winding. To determine problems with it, you need to be able to use a multimeter.

flush the filter
The filter should be washed regularly and replaced every two years.

Only with its help can you determine the problem. The rest of the problems that can be solved on our own include:

  • Broken button;
  • Broken wire in the extension cord;
  • Poor contact at brush terminals and winding.

If it comes to repairing the engine, then here you need to evaluate your strengths and financial capabilities.It is easier to buy a new component, although the purchase of bearings is much cheaper when it comes to them.

terminals on the brush
Check the terminals on the brush.

Checking the motherboard

The control board in a vacuum cleaner does not look the same as in a computer. It is a triac. From the part to the motor there are 2 wires on one side and on the other 2 wires are attached to the outlet. The triac itself is between them.

Disassemble the engine
Only a specialist can repair the motherboard.

Remove it and connect the motor to the wires from the outlet. If everything is in order, you just need to replace the board. Some owners use a vacuum cleaner without it.

Cleaning the vacuum cleaner

The vacuum cleaner also needs to be cleaned. Starting with the nap with which you vacuum, and ending with the insides. Empty the dust container in time, whether it is a reusable bag or a disposable one. If you have removed construction dust and it was clogged, after removing all the parts, you can clean the insides.

dust collector
Odor can occur if the dust container is full and has not been cleaned for a long time.

It is convenient to do this with another vacuum cleaner, but be careful. Care should be taken in the boards. Do not use a wet cleaning method.

Preventive measures

It is better not to cure the problem, but to prevent it. This applies to everything and vacuum cleaners too. How she looks like? Basic care: change the dust bag in time or empty it.

Every technique
Each technique has its own weaknesses.

An important detail is the brush. Cleaning for its lint should also not go through the side. If the vacuum cleaner is intended for dry cleaning, do not suck in water and other liquids, they will accumulate inside. This leads to breakage.

clean the vacuum cleaner
Clean the vacuum cleaner often to extend its shelf life.

Please keep your warranty receipt after purchasing your vacuum cleaner, if you have one. Most types of breakdowns can be repaired by specialists. If there is no one or another type of breakdown, do not be afraid to use the video from the Internet, where the craftsmen will tell you how to repair a broken Samsung vacuum cleaner with your own hands.

Video: Samsung vacuum cleaner repair

https://youtu.be/dXI1ZmuXQxk

Furniture

Kitchen

Life hacks