How and how to clean the grate of a gas stove from grease and carbon deposits
The gas stove, without exaggeration, is the focal point of the kitchen. On it, something is constantly boiling, heated, fried. Naturally, these processes cannot take place in absolute purity. If the milk has not escaped, then oil has sprinkled from a hot frying pan or broth has spilled out from a boiling pan.
For this reason, the stove becomes dirty, and not only its surface, burners, but also the grate. Just, sometimes, you have to tinker with washing the grate. To achieve the desired result, we will study how to clean the grate on a gas stove from soot and grease.
Why is the gas stove grate difficult to clean
Quite often, having washed the stove from dirt, there is simply no strength and desire left on the grate. Next time, there was not enough time. As a result, the remaining fat from cooking sticks to the rods, each time increasing in volume. Add house dust that builds up on fat deposits, turning them into fossils.
The final point is set by fire, under the influence of which mud deposits evolve into carbon deposits. The saddest thing is that under the layer of this mud formation, corrosion and destruction of the metal begins. Therefore, you need to know how to clean the grate of a gas stove from carbon deposits.
Folk remedies for cleaning grates
By tradition, we will begin to consider ways to clean the grate of a gas stove, with proven popular recommendations. Using homemade, available tools will free you from shopping trips in search of a suitable chemical and save you from unplanned expenses. Let's take a look at the most common cleaning methods available.
Boiling water
Using water brought to a boil is the most cost-effective way to remove carbon deposits. To carry out the operation, we adhere to the following action plan:
- Preheat the oven to the maximum.
- Place the wire rack in a tray and fill it with boiling water.
- We load it into the oven and wait for the carbon deposits to separate.
- Take out the baking sheet and let cool.
- Using a sponge, wipe off the remaining dirt.
- We wipe the grate cleaned of scale with a soft cloth or napkin.
If you are using a non-standard baking sheet, then first make sure that the dimensions of the tray correspond to the dimensions of the oven.
Mustard
Mustard seed powder will do an excellent job of breaking down fat residues. He not only cleanses the grate from carbon deposits, but also disinfects its surface. To do this, prepare a cleaning paste from mustard powder by mixing a small amount of mustard with water until a mushy mass is formed.
We wipe the lattice fittings of the gas stove with a sponge soaked in water, apply mustard paste to the surface and leave for two to three hours.We clean the rods from carbon deposits using a hard sponge.
Ammonia
An effective means of cleaning grids from gas stoves from old contaminants is a 10% ammonia solution. Since it is a volatile substance with a pungent odor, work with it should be carried out outdoors or using a respirator in a ventilated area.
Pour 40-100 ml of ammonia into a large plastic bag, commensurate with the lattice product, and put the lattice inside. The bag is hermetically closed and kept for 3 to 8 hours, depending on the amount of dirt deposits. After a lapse of time, the grate must be washed and dried.
Steam
A convenient way to clean the grate on a gas stove is to use a steam generator. The advantage of steam also lies in the fact that the surface of the plate is not imparted by the treatment with chemicals. We install the steam generator next to the gas stove. Armed with a nozzle with stiff bristles, we clean off carbon deposits, which are softened by a jet of hot steam.
Places of abundant carbon deposits can be cleaned with a scraper. After that, it remains only to collect the crumbling dirt from the surface of the plate.
Silicate glue
Enough, an unusual tool, but with a good cleaning effect from dirt - a mixture based on silicate glue. It is most often prepared with the addition of washing powder. To mix you will need:
- one bottle, 50 ml, glue;
- washing powder - 150 g.
The ingredients are mixed until a homogeneous mass is formed. The resulting mixture is applied to the lattice lintels and kept for at least one hour. To speed up the process, the slab can be covered with polyethylene. The cleaning agent works by softening dirty deposits. After that, the grate must be washed with a hard sponge in warm water.
Cleaning methods depending on the material
The sections of the grates on gas stoves, in accordance with the material for production, are cast iron and steel. Steel, in turn, are produced in two types - enameled and stainless steel. Information about what kind of grate is on your stove can be gleaned from the product passport.
Despite the fact that carbon deposits and soot appear regardless of the surface material, the method for cleaning cast iron grates on a gas stove is somewhat different from the methods for cleaning steel products.
Cast iron alloy
The main properties of cast iron alloy products are:
- high strength;
- long service life;
- retains heat long enough after heating;
- no deformation under conditions of prolonged temperature exposure;
- increased corrosion resistance.
These indicators make cast iron grates for the stove more preferable than steel ones.
Calcination
The method of calcining, not to be confused with piercing, consists in prolonged high-temperature processing of the product. To do this, a section of the grate is placed over a gas flame and heated, while all the caked fat and dirt will flake off and crumble. After cooling down, the remaining dirt on the rods can be easily removed with a brush and wiped off with a damp cloth. It is not recommended to wash cast iron products.
Important note! Calcination is best done outdoors, because particles of old fat and dirt, when burned, give off a pungent smoke and odor.
Washing the grate with vinegar
Vinegar, where without it, is quite an active element in terms of the decomposition of fats.In addition, it is part of most surface cleaners from oily contaminants.
To clean old carbon deposits, you must use vinegar essence. It is diluted with water in a ratio of three to one, and in such a solution the lattice is left to sour for 8-10 hours. After that, the remnants of dirt from the structure are removed with a hard sponge and wiped off with a damp, soft cloth.
Laundry soap
Effectively cleans grease and soot solution with 72% laundry soap. How to prepare the mixture:
- Rub the third part of a bar of laundry soap on a coarse grater.
- Add 1-2 teaspoons of baking soda.
- Fill in 0.2-0.3 liters, heated to 40 degrees, water.
- Mix until a thick mass is formed.
Immerse the grate in the resulting mixture and wait until the burnt fat begins to soak. Then we remove it with a sponge and rags.
Enamelled or stainless steel
Steel grates for the hob look more aesthetically pleasing, much lighter than cast iron, tolerate water procedures well, but are less durable. They must not be ignited or machined. They demand a more sparing attitude towards themselves. In order to wash them, chemically aggressive detergents are used.
For stainless steel, it is possible to use products with a slight abrasive effect.
It is not recommended to clean enamelled coatings with sharp metal objects, metal sponges and abrasive agents. They can lead to cracks, scuffs or chipping of the enamel and trigger the corrosion process.
Vinegar and water
To remove dirt and grime from the surface of the rods using water and vinegar, these ingredients are mixed in a one-to-one ratio. The solution is poured into a container that allows the lattice structure to be completely immersed in it. As you know, vinegar is good at eating away fat and softening carbon deposits.
After at least eight hours, the product is removed from the water-acetic mixture, the remnants of the mud layers are washed off with soapy water and dried.
Melamine sponge
One of the newest advances in the chemical industry in the field of cleaning agents is a melamine rubber sponge. The material easily copes with stubborn dirt on hard surfaces without the help of household chemicals. Serves much longer than a regular sponge.
It's very easy to use. After submerging the melamine sponge in water, it becomes soft, elastic and gives off foam. It remains only to thoroughly wash every detail of the grill, and then rinse it with running water.
Attention! Melamine is toxic, avoid ingestion.
Dry mustard and vinegar
Mustard is an excellent disinfectant, and when mixed with vinegar, it effectively breaks down fat.
The process of removing contaminants using such a tool includes the following steps:
- Vinegar 9% is mixed with mustard powder in a 1: 1 ratio.
- By adding warm water in small amounts, bring the mixture to a homogeneous mass.
- The edges of the grating are processed and left for three hours (the time depends on the degree of contamination).
- With a hard sponge, with a small amount of detergent, the product is finally washed.
Other effective ways
In addition to the considered methods of cleaning the furnace grate from burning, there are other, no less effective methods. Baking soda is very popular, just three spoons mixed with water will easily clean the cast iron grate with a scraper and brush.
Household chemicals are no less effective in dealing with carbon deposits and fat. The range of such funds is different in composition, cost, and purpose.
Tips and tricks for maintaining your hob grate
The most rational solution for maintaining the grate is to clean it after each cooking. Fresh drops of grease and liquids can be easily removed with ordinary dish soap or materials at hand. For example, you can remove a fresh oily bloom by wiping the twigs with a lemon wedge and sponge it after half an hour.
Do not leave the grill wet, as dust adheres very quickly to damp surfaces.
Disturbed by the stale smell from the stove, treat the edges of the grate with table vinegar, sprinkle with salt on top. After waiting 10-15 minutes, wash in warm water and wipe dry.
Any household appliances that surround us and make our life easier requires care and respect. The stove is not an exception, but rather a rule. It gets overgrown with dirt quickly, but is washed with difficulty. Therefore, regularity combined with the right methods - and everything will shine with purity.
Video: how to clean the grate of a gas stove
